You can now let go the DOWN button on your D-Pad.ĩ. The function Button is located at the right Analog Stick.Ħ. You now should see 2 LEDs light up (if you have an older controller, the controller will vibrate) one above the Home Button and one on the function button. Plug the smaller end of the USB-Cable into your controller.ĥ. ![]() Make sure your PC or Console is powered on and plug the USB-Cable into your PC or Console.Ĥ. Unplug the USB-Cable from your Controller.Ģ. Please follow the provided instructions below to re-calibrate your controller.ġ. If you find that your controller's thumbsticks are showing movement without being touched, your controller may need to be recalibrated. My thumbsticks seem to be drifting/moving without me touching them. PDP Controller Drivers (32 bit and 64 bit).zip.You can install the 64 bit version of the driver on your 64 bit windows instance, and the same goes for the 32 bit version!) (The drivers below are both for Windows 32, and 64 bit versions. If the controller still does not work after making sure Windows is fully up-to-date, or if you are using an older version of Windows, you may need to install the drivers that you can download below. The controllers work plug 'n' play with Windows 8.1 and Windows 10, with the latest updates installed. If the controller does not work immediately upon connecting to a PC, then you may need to update the official Microsoft drivers in your PC through Windows Update. The PDP Xbox controllers can work on a Windows PC. Press and hold the Function Button, press the Back Paddle you would like to Re-map, and then press the new button you would like to re-map to Press and hold the Function button found in the bottom middle of your controller, next to the right joystick. Click on Back of Controller, select the Back Paddle you would like to remap, and then select the new button you would like to re-map to.Īdditionally, you can re-map your Back Paddles outside of the PDP Control Hub App! Click on the Front of the Controller, select the Original Button you would like to customize on the left, and then select the New Button on the right.ģ. Go to Configuration, Re-map Buttons, and customize the Front buttons or the Back Paddles.Ģ. You can easily re-map buttons in the Re-map Buttons Configuration screen in the PDP Control Hub App.ġ. How do I re-map the buttons on my controller? Stick: LEDs will react to the movement of the analog sticks.Cycle: LEDs will cycle through a variety of colors.Breathing: LEDs will slowly fade in and out to the set color.After you have selected your favorite mode, you can release the function button. You can use the left and right bumpers (LB and RB) to cycle through the light modes. To cycle through the light modes, press and hold the function button.After you've set up the controller to your taste, release the function button before letting go of the analog stick or trigger. While you hold down the button, you can use the left analog stick to control the color and the left trigger (LT) to change the brightness. To change the color and brightness, press and hold the function button. ![]() Next to the color and brightness, 4 unique light modes can be selected. The function button (the triangular button right next to the right analog stick) can be used to change the Afterglow lighting settings to your personal preference. How can I use the function button to change the LEDs on my controller? The program status LED will turn RED when muted.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |